Supplied with low watts density coiled titanium heating elements. Elecro Nano heaters are titanium construction and an ideal solution for ponds and tropical marine applications.
• Easy installation, fully equipped and pre-wired
• Robust, durable construction • Ultra-reliable flow switch allows safe operation
• Supplied with temperature thermostat & overheating sensor
• Compact, durable design
• Analogue control with 1.2°C differential
• Titanium flow tube and titanium heating element
• Can be floor or vertically wall mounted
• Vortex, long life, stay clean heating element technology
• Silent operation
Power Supply - Single phase
Flow Requirements - Minimum flow: 1m³/h - Maximum flow: 17m³/h
Heating Elements - Grade 1 titanium
Flow Tube - Grade 1 titanium
Control Thermostat - Analogue: 0>45°C (1.2°C differential)
Safety Thermal Cut Out - 60°C (manual reset)
Flow Switch - Gold tipped reed switch with titanium fulcrum pin
Water Connections - 1.5" BSP female thread supplied with 1½" / 50mm stepped ABS unions for rigid pipe and 1½" / 1¼" stepped hose tails for flexible pipe
Ingress Protection Rating - IP44
Frequency - 50/60 Hz
Working Pressure - 4 bar maximum
Mounting - Floor or wall mounting
| Elecro 1kW UK Nano Titanium Heater (230V) |
| Elecro 2kW UK Nano Titanium Heater (230V) |
| Elecro 3kW UK Nano Titanium Heater (230V) |
| Elecro 1kW EU Nano Titanium Heater (230V) |
| Elecro 2kW EU Nano Titanium Heater (230V) |
| Elecro 3kW EU Nano Titanium Heater (230V) |
